Hitachi VT-FX623A - Manual (Page 62)

62
2 Press the REC, then PAUSE buttons on VCR-1. The VCR will go into
Record/Pause.
3 Press the PLAY button on VCR-2. You will see the taped program being played
on the TV.
4 When you see the part of the program you wish to record, press the PAUSE
button on VCR-1 again to release pause and start recording.
• Press the STOP button to finish recording.
PROBLEM GUIDE / MAINTENANCE
Problem guide
No power • Make sure the VCR is plugged into an AC outlet.
Remote control doesn't work • Make sure the batteries are fresh, and properly
installed.
Won't record • Safety tab has been removed from cassette (VCR will
automatically
eject
the tape).
Won't play back • Make sure the TV/VCR switch is set to the VCR mode.
• Make sure the TV is set to the VCR channel (3 or 4) or
AUX (if using
direct
audio/video hookup).
Won't make timer recordings • The VCR power must be turned off to activate timer
recording.
• Clock is not set correctly.
• Programs entered incorrectly.
• Programs exceed the length of the cassette. Use the EP
recording