Hitachi VT-FX623A User Manual

Page 51

Text mode
Original mode

VCR Plus+ setup - Channel setup

The following shows the procedure you should perform when you are receiving the
Cable News Network (channel 42 with the VCR Plus+ system) on channel 38.

Matching Broadcast CH Numbers to VCR Plus+ Channels for Home Antenna or
Cable (No Cable Box) Setup (Hookups [A], [B], [C] or [D].)
1 Turn on the TV and select the Video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.

2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.

3 Press the (4) button to select CHANNEL PRESET.

4 Press the (4) button to select VCR PLUS+ SETUP.
A small arrow points to a blank "--" in the CHANNEL column.

Note: If your broadcast channel number is the same as the VCR Plus+ Channel in your TV
listing do not enter any number.

5 Press the CH (

) button to move up and down through the channel list until you

reach VCR Plus+ CH42.