Hitachi VT-FX623A - Manual (Page 58)

58
3 Press and hold the "TV" button.
4 Press the remote button corresponding to your TV brand as shown in the set-up
chart. The TV channel will change to confirm that the remote control has been
set.
TV Brand Press "TV" and TV Brand Press "TV" and
this remote button this remote button
Hitachi 1 Pansonic 2 9
Zenith 2 RCA 0
Sony 3 Panasonic 1 CH
Magnavox 4 Mitsubishi CH
Sanyo 5 JVC 100/ENT
Gold star 1 6 Sharp 1 LAST CH
Toshiba 7 Sharp 2 DISPLAY
Gold star 2 8
Note: If your TV brand is not listed on the Set-Up Chart, try all the buttons listed in the chart
until the TV changes channels. If the TV channel does not change, you won't be able to
program the remote for your TV.
Using the VCR remote to control your TV
1 Press the "TV" button on remote control.
2 Point VCR remote control toward TV.
3 Press buttons corresponding to the functions available on your TV remote
control.