Hitachi VT-FX623A User Manual
Page 24
24
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
3 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.
4 Press the (4) button to select the CHANNEL PRESET operation.
5 Press the (1) button to select the type of receiving setup you have:
pic
cable
Internal or external antenna
Alternate cable (If CATV1 doesn't give you the channels you expect).
6 Press the (2) button.
The VCR will automatically store channels received in your area. It takes about 2 - 3
minutes. After the channels are stored in memory, the channel with the lowest number
appears in the VCR's display.
pic
7 Press GUIDE to return to regular viewing.
Note: Your VCR is capable of receiving 68 broadcast TV channels (VHF 2-13, UHF 14-69)
and cable channels (1-125). In some areas channels cannot be received when CATV1 is
selected. In this case, select CATV2 in the receiving setup.
When automatic presetting of channels are finished
Press the CH (channel) button (or numbered buttons) to check the channels you can
receive.