Hitachi VT-FX623A - Manual (Page 28)

28
3 Press the (4) button to select the CHANNEL PRESET operation.
4 Press the (1) button to select .
5 Press the (5) button to select "CABLE BOX SETUP" menu.
6 Press the (1) button to answer "YES" to the question "IS A CABLE BOX BEING
USED?"
Note: Refer to the cable box owner's manual to identify the cable box output channel (usually
3 or 4).
7 Turn on your cable box and select channel 2.
8 Using the VCR remote, enter the cable box output channel numbers. Click to see
remote control illustration.