Hitachi VT-FX623A - Manual (Page 27)

27
4 Press the (1) button to select AUTO BLUE "ON" or "OFF".
ON: The screen becomes blue and mutes sound when a channel without a broadcast
signal on the VCR or a channel on which broadcasting has finished.
• If the signal is too strong, this function may not operate even if you specify .
During playback this function does not operate.
OFF: The AUTO BLUE feature is switched off.
5 Press the GUIDE button to end the setting.
CABLE BOX SETUP
Note: This setup should be performed if you receive all channels through a cable box
(Hookups [E], [F] or [G]).
The VCR can be programmed to:
Automatically select channels on the cable box during a timer record or VCR Plus+
delayed recording operation.
Change channels on remote controlled cable boxes with the VCR remote control.
BEFORE YOU BEGIN...
Make sure the cable box is positioned properly on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.