Hitachi VT-FX623A - Manual (Page 59)

59
INTEGRATING YOUR STEREO SYSTEM WITH YOUR VCR
Hookup
When your VCR is connected to a stereo system, you can:
• Make high quality "audio only" recordings for up to 6 hours (on a T-120 video cassette
tape).
• Receive quality stereo sound from your VCR through your stereo system.
• Use the VCR as an extra audio tape deck for dubbing.
Stereo System Hookup Illustration
To record from stereo
BEFORE YOU BEGIN...
• Make sure the VCR is connected to your stereo system, as shown above.
• Make sure that "STEREO" audio is selected from the VCR Set-Up Menu, as shown on
Page 40, of "RECORDING OPERATION" Section, "Stereo vs. mono sound".
• Select VCR recording speed (SP or EP) as shown on page 37, of "RECORDING
OPERATIONS" Section, "Basic Recording Steps".
1 Press the AVX button on remote control, so that L1 (line) appears on the
display.
2 Turn on stereo, and start the selection you wish to record.
3 Press the REC/IRT button on VCR or REC button on the remote control to start
recording.
4 Press the STOP button or remote control to stop recording.