Hitachi VT-FX623A - Manual (Page 41)

41
Example: Select channel 8.
• 100/ENT and (2) and (4) for channel 124.
6 Press the REC button on the remote control or the REC/IRT button on the VCR.
Recording will start and the REC indicator on the VCR will appear.
Notes:
• Recording will not start unless the cassette has the safety tab in place. If this tab has been
removed, the VCR will eject the tape.
• Press the PAUSE button to set the VCR to the recording pause mode. Press the button again
to re-start recording.
• If you stay in PAUSE mode for more than 5 minutes, the VCR automatically switches to
STOP mode to protect the tape.
7 Press the STOP button to finish recording.
RECORDING A PROGRAM -RECORDING TIPS
To watch one program while recording another
1 Once you have set the VCR for recording, press the VCR/TV button.
The VCR indicator disappears. Now, you will be viewing through your TV only.
2 Switch channels using your TV controls or the VCR remote, if it's programmed
to control your TV (see page 52).