HP PhotoSmart 945 - Manual (Page 91)

Chapter 6: Using the Setup Menu 91
Reset Settings
This option allows you to reset the camera to the factory default
settings.
1 In the Setup menu (page 83),
select Reset Settings.
2 In the Reset Settings sub-menu,
highlight one of the following:
• Cancel - exits the menu without
making any changes.
• All Capture Settings - resets Flash , Focus , Timer/Burst ,
and Capture menu settings to factory defaults. If the flash
is down or the camera is in Video mode, the Flash setting
will be AUTO FLASH the next time the flash is available.
Settings that were checked in the Remembered Settings
sub-menu will stay checked.
• Reset All Settings - resets all capture settings as described
above, plus all settings in the Setup menu except Date &
Time , Language , TV Configuration , and USB
Configuration . All settings that were checked in the
Remembered Settings sub-menu will be unchecked.
3 Press OK to save the setting and return to the Setup menu.