Printing images using the dock – HP PhotoSmart 945 User Manual

Page 133

Appendix B: Camera Dock

133

Printing Images Using the Dock

Confirm the following:

•

The dock insert that came in your camera box is attached to the

top of the camera dock (see the camera dock Setup poster).

•

The USB cable is connected between the camera dock and your

printer, and the power cable is plugged into the dock (see the

camera dock Setup poster)

•

The printer is turned on and paper is loaded in the printer.

Place the camera into the camera dock. The camera will turn

on automatically.

Press the

Save/Print

button

on the dock, and the

Print Setup

menu displays on the camera. If

you already selected images to

print using the camera

button, the number of images

selected is shown in the

Setup

menu. Otherwise,

Images: ALL

is displayed. To select

or change the selections of images to print, press the

button, scroll through the images using the

buttons, then

use the

buttons to adjust the number of copies for

each image, and when satisfied with your selections, press

the

button again to return to the

Print Setup

menu.

If all the settings in the

Print Setup

menu look correct, press

on the camera to begin printing. Or, you can change

settings in the

Print Setup

menu using the arrow keys on the

camera, then follow instructions on the screen to begin

printing.

NOTE

There is a print preview in the lower right-hand corner

of the

Print Setup

screen showing the page layout that will

be used for printing images. This print preview updates as

you change the settings for the

Print Size

and

Paper Size