HP PhotoSmart 945 - Manual (Page 88)

88 HP Photosmart 945 User’s Manual
USB Configuration
This setting determines how the camera is recognized when
connected to a computer.
1 In the Setup menu (page 83),
select USB Configuration.
2 In the USB Configuration
sub-menu, highlight one of
choices available:
• Digital Camera —Causes the
computer to recognize the camera
as a digital camera using the Picture Transfer Protocol (PTP)
standard. This is the default setting on the camera.
• Disk Drive —Causes the computer to recognize the camera as a
disk drive using the Mass Storage Device Class (MSDC)
standard.
Use this table as a guide for which USB Configuration
setting to use with your computer:
3 Press OK to save the setting and return to the Setup menu.
HP Photo &
Imaging software:
Windows Macintosh
Installed on your
computer
Digital Camera Disk Drive
Not installed on
your computer
Disk Drive Digital Camera
(OSX systems)