Recording video clips – HP PhotoSmart 945 User Manual
Page 29
Chapter 2: Taking Pictures and Recording Video Clips
29
Recording Video Clips
1
Rotate the
Mode
selector to
Video
mode.
2
Frame the subject for your video in
the active display.
3
Press the
Shutter
button halfway
down to measure and lock focus
(exposure is continually measured
and adjusted during recording).
4
To start recording, press the
Shutter
button all the way down
and release it. A counter and
REC
appear in the active
display.
5
To stop recording, press the
Shutter
button all the way down
again. Otherwise, the camera will automatically stop
recording when the maximum video clip length of
approximately 1 minute is reached, or the memory card is
full, whichever comes first (note that maximum clip length
can vary depending on scene content).
After recording has stopped, the first frame of the video clip
and
PROCESSING...
appear on the active display. While it is
processing, you can delete the video clip by pressing the
OK
button. You can use
Playback
to review the video clips you have
NOTE
If you use the zoom, motor noise from optical zooming
will be recorded in the audio portion of a video clip. Thus,
for best audio quality, do not use the zoom while
recording video.
Av
Tv
AUT
O
Av
Tv
AUT
O
AUT
O