Using the focus settings – HP PhotoSmart 945 User Manual
Page 36
36
HP Photosmart 945 User’s Manual
Using the Focus Settings
The
Focus
button lets you toggle
between four focus settings on the
camera.
The following table describes each of the
focus range settings on the camera.
Icon Setting
Description
None
NORMAL
Use when taking pictures of subjects greater
than 0.8 m (31.5 in) away. Auto focus is
limited to a range of 0.8 m (31.5 in) to
infinity. This is the default focus setting.
MACRO
Use when taking close-up pictures of subjects
less than 0.8 m (31.5 in) away. In this mode,
the camera will not take a picture if it cannot
find focus (the focus brackets turn red in the
active display and an error message
appears). Auto focus has a distance range of
0.1 to 0.8 m (3.9 to 31.5 in). Zoom position
is limited to a range of wide to 3.5x.
INFINITY
Use when taking pictures of distant objects
and landscapes. Focus range is limited to a
small region near infinity.
MF
MANUAL
FOCUS
Allows you to step manually through the full
focus range. Use the
buttons to
adjust the focus. You can determine the focus
by observing the image in the active display
and by a meter that appears on the right side
of the active display. For more information,
see
MF
MF