HP PhotoSmart 945 User Manual
Page 78
78
HP Photosmart 945 User’s Manual
NOTE
If your computer is running Windows XP, when you
turn on the camera in the next step, a dialog box will
display that requests you to
Select the program to launch
for this action
. Simply click on
Cancel
to close this dialog
box.
5
Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the
Welcome
screen, click
Start Unload
. The images are
unloaded to the computer, and then if there are any still
images that were previously selected for printing (page 60)
or selected for
HP Instant Share
destinations (page 69),
those actions are started.
6
When the unload screen on the computer says
Finished
, you
can disconnect the camera from the computer.
NOTE
To unload images to a Windows Me, 2000, or XP
computer that does not have the HP Photo & Imaging
software installed on it, change the
USB Configuration
setting to
Disk Drive
in the
Setup
on page 88). This allows the camera to
appear as another disk drive on the computer so that you
can easily copy the image files from the camera to the
hard drive of your computer. However, the HP Instant
Share feature will only work when the HP software is
installed on your computer.
NOTE
Another way to unload images is to use a memory
card reader or one of the memory card slots available in
HP Photosmart printers. See the manual for your printer
for instructions on how to do this.