HP PhotoSmart 945 - Manual (Page 90)

90 HP Photosmart 945 User’s Manual
Language
This setting allows you to set the language used in the camera
interface, such as the text in menus.
1 In the Setup menu (page 83),
select Language.
2 In the Language sub-menu,
highlight the language you want
to use.
3 Press OK to save the setting and
return to the Setup menu.
Remembered Settings
This setting allows you to save some camera settings that would
normally reset to their default values when the camera is turned
off.
1 In the Setup menu (page 83),
select Remembered Settings.
2 In the Remembered Settings
sub-menu, use the buttons
to highlight a setting, then use the
buttons to check or uncheck a
selection.
3 Press OK to save the settings and return to the Setup menu.
NOTE The saved setting for Flash is temporarily ignored if the
camera is in Video mode or the flash is down.
NOTE Any Capture menu item that is not in this screen
already remains set to whatever you selected when the
camera is turned off and then back on.