HANNspree 1506-060B000 - Manual (Page 40)

39
English
4. During the setting process, releasing the electronic equipment button exits the
setting mode immediately without changing the status prior to setting.
5. Buttons other than CH+/CH- are not functional during search. Channel buttons
include CH+ and CH-.
6.1.6 Factory Setting Mode
Factory setting operation procedures are as follows:
1. Press the corresponding electronic equipment button. The indicator light will come
on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on
again, showing setting mode has been entered.
2. While holding the electronic equipment button, first press < (left arrow), then press
OK. The indicator then goes off and setting mode is exited, showing factory setting
has been restored.
3. During the setting process, releasing the electronic equipment button exits the
setting mode immediately without changing the status prior to setting.
4. Pressing any of the electronic equipment buttons to enter factory setting operation
mode.
5. The default current electronic equipment is TV upon first power-on.
Electronic
equipment
Code Note
TV 1001
Provided by
manufacturer
CABLE -- Transmit TV code
AUDIO -- Transmit TV code
DVD -- Transmit TV code