HANNspree K206-10U1 - Manual

Watching Broadcast or Cable TV
Selecting A/V Sources
Auto Channel Setup
Front View Front View Rear View Rear View
Copyright 2004, Hannspree California, Inc. All rights reserved.
Making Connections
Connecting to a VCR, VCD, DVD Player, or Video Game Console
Connecting the Power Adapter
2. The cables are
color-coded (black,
red, white, and yellow).
Connect each color-
coded cable to
the appropriate
connector on your
device.
1. The illustration presented
here shows you how to
connect your TV to a
VCR, VCD, DVD player
or video game console.
Connecting to Antenna/Cable TV
A/V and Channel Setup
MAD-001093
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT Jack
(VHF/UHF IN Jack) on the back of the
TV.
2. Connect the other end of the VHF/UHF
(Antenna) or CATV cable to the Antenna
or CATV socket.
Video game console
B
R
W
Y
B R W Y
AV connectors
S-Video
connector
VCR
DVD
VCD
4-IN-1 A/V jack
4-IN-1 A/V cable
1. Connect the power cord to the power
adapter as illustrated.
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
1. After you have made the appropriate power and source
connections, press the power button to turn on your television.
2. Press the
SOURCE button to select TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
4. Press the
CH button to select the TV setting.
5. Press the MENU button.
6. Press the CH or CH button to select TV/CATV.
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
2. Press the SOURCE button on the
control panel to select different source signals.
TV/CATV channel number, AV or S-Video
appear on the screen.
K206-10U1 9.6" Liquid Crystal Display TV
Other Models
Quick Start Guide
The information in this Quick Start Guide applies to all models shown below.
This guide is designed as a reference to help you start using your LCD TV quickly.
Please refer to the User's Manual for more detailed installation and safety instructions.
Source Menu
Speaker Speaker
Headphone jack
4-IN-1
DC 12V
Antenna/Cable TV
DC 12V HEADPHONE ANT 4-IN-1
DC 12V HEADPHONE ANT 4-IN-1
Note: Do not unzip the plush cover. The plush
cover may only be removed by the qualified
personnel to service the product.
Antenna
Antenna/CATV
coaxial cable
ANT jack
(VHF/UHF IN Jack)
DC 12V HEADPHONE ANT 4-IN-1
DC 12V HEADPHONE ANT 4-IN-1
DC 12V HEADPHONE ANT 4-IN-1
DC 12V HEADPHONE ANT 4-IN-1
DC-IN
Power adapter
Power cord
Power outlet
DC 12V HEADPHONE ANT 4-IN-1
DC 12V HEADPHONE ANT 4-IN-1
SOURCE CH
CH
VOL VOL menu
TV
S-Video
AV
SOURCE CH
CH
VOL VOL
menu
Channel
select
Volume
adjust
Remote IR sensor
Power
indicator LED
Auto Program
1. Press the MENU button to enter the OSD menu.
2. Use the channel buttons on the control panel to select the “TV Setting” menu.
3. Press menu again until the “Auto Program” feature is selected.
4. Press
CH to select yes.
ENTER
TV
YES NO
AUTO SET MENU SET
Setting
AUTO Program
Channel +-
6. Your television will begin automatically memorizing the available channels.
5. Press the button. MENU