HANNspree DT02-10U1 - Manual

Selecting A/V Sources
A/V and Channel Setup
Watching Broadcast or Cable TV
MAD-001148
Quick Start Guide
Front View Front View Rear View Rear View
Copyright 2004, Hannspree California, Inc. All rights reserved.
Making Connections
Connecting to Antenna/Cable TV
Connecting to a VCR, VCD, DVD Player, or Video Game Console
Connecting the Power Adapter
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.
Auto Channel Setup
1. Connect the power cord to the power
adapter as illustrated.
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
Note : For information on connecting your
TV to a computer, refer to the user's
manual.
Power adapter
Power cord
Power outlet
DC-IN
S
S
VCR
VCD
DVD
B R W Y
AV
connectors
S-Video
connector
S
S
4-IN-1 A/V jack
2. The cables are
color-coded (black,
red, white, yellow).
Connect each color-
coded cable to
the appropriate
connector on your
device. 1. The illustration presented
here shows you how to
connect your TV to a
VCR, VCD, DVD player
or video game console.
Video game
console B
R
W
Y
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT
Jack (VHF/UHF IN Jack) on the back
of the TV.
2. Connect the other end of the
VHF/UHF (Antenna) or CATV cable
to the Antenna or CATV socket.
Antenna
Antenna/CATV
coaxial cable
ANT jack
(VHF/UHF
IN jack)
S
S
M TV
Power indicator LED Remote IR sensor
TV
Menu
Volume adjust
Channel select
M
TV
Speakers
Auto Program
TV Setting
Auto Program
ON ON OFF
A M +- CH
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
2. Press the TV button on the control panel to
select different source signals. TV/CA TV
channel number, AV1 or AV2 appear on the
screen.
1. After you have made the appropriate power and
source connections, press the power button
to turn on your television.
2. Press the
TV button to select TV.
6. Press the button to select TV/CATV.
3. Press the MENU button on the
control panel to enter the OSD menu.
4. Press the button to select the TV setting.
5. Press the MENU button.
TV
AV2
AV1
M
TV
DC-IN
Video in (RCA x 1)
Audio in (Left, RCA x 1)
Headphone line out
(3.5 mm stereo)
AV2 Antenna/Cable TV line in
Audio in (Right, RCA x 1)
S
S
DT02-10U1 9.6" Liquid Crystal Display TV
1. Press the MENU button to enter the OSD menu.
2. Use the channel buttons on the control panel to select the “TV Setting” menu.
3. Press the
MENU button to enter the TV Setting menu.
4. Press channel buttons to select Auto Program.
5. Press the
MENU button to enter the Auto Program Setting submenu.
6. Press channel buttons to select ON or OFF and press the MENU button .
7. Your television will begin automatically memorizing the available channels.