HANNspree 1506-060B000 - Manual (Page 33)

32
Engli
sh
3.6 Adjusting Setup Settings
1 Press MENU to enter the OSD Main
Menu screen.
2 Press / on the remote control or
CHS / CHT on the control panel to select
Setup menu.
3 Press / OK on the remote control or
INPUT/ VOL+ on the control panel to
enter the Setup menu.
4 Press / on the remote control or CHS / CHT on the control panel to select
an item.
5 Press / OK on the remote control or INPUT/ VOL+ on the control panel to enter
the item.
6 Press / on the remote control or VOL+ / VOL- on the control panel to change
the scales or press OK on the remote control or INPUT/ VOL+ on the control panel
to mark an item.
7 Press RETURN to return to the Setup menu.
8 Press MENU/ VOL- to exit the Setup menu.
9 The Setup menu can be used to adjust the Setup Wizard, OSD Language, OSD
TIme, Clock Mode, Clock Set, Time Zone, Sleep Time, Back Light, CC Mode,
Analog CC, and CC Style settings. Clock Set is only available for adjustments when
Clock Mode is set to Manual; Clock Mode can be set to
Auto or Manual.
• Setup Wizard can be used to set up OSD Language, Clock Mode, Time Zone, TV
RF Source, and channel scan.
• The five available OSD languages are: English, Spanish, French, Traditional
Chinese, and Simplified Chinese.
• OSD Time can be set to 10 secs, 20 secs, 30 secs, and 60 secs.
• The Time Zone can be set to Eastern, Central, Mountain, Pacific, Alaska, and
Hawaii.
• The Sleep Time can be set to Sleep Off, 15 mins, 30 mins, 45 mins, 60 mins, 90
mins, and 120 mins.
• Press / on the remote control to move the scale in the Back Light settings.
• To change settings in CC Mode, Analog CC, Digital CC, and CC Style, press
/
on the remote control to select the items and press / OK to activate the
item.
Note:
The items available on the OSD may vary depending on the input signal source.
Picture
Audio
Channel
V-CHIP
Setup
Setup Wizard
OSD Language
OSD Time
Clock Mode
Clock Set
Time Zone
Sleep Time
Back Light
CC Mode
Next Page
Exit Return Enter OK Menu Move Return