Heat & Glo Fireplace 2197-980 - Manual (Page 20)

Heat & Glo • SOHO-N-AUB • 2197-980 Rev. G • 2/13 20
5
Framing and Clearances
A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffic and away from furniture and draperies.
NOTICE: Illustrations reflect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
Figure 5.1 Appliance Locations
B
C
A
A
13 mm
ALCOVE
INSTALLATION
TOP VENT,
ONE 90º ELBOW
D
MINIMUM
B
A B C D
Inches 33 29 47 35
Millimeters 841 740 1187 892
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 5.D and 13.B).
• Flue Clearances and Framing (Section 6).
NOTE: For actual appliance dimensions refer to Sec-
tion 16.