HP Home Theater System - Manual (Page 143)

Initial Configuration 137
Initial Configuration
Selecting recording devices
To select a sound recording device:
1 Click Start on the taskbar.
2 Choose Control Panel.
3 Click Sounds and Audio Devices (or Sounds,
Speech, and Audio Devices). The Sounds and
Audio Devices window opens.
4 Click the Audio tab. The window opens.
This window is easier to read on a monitor. You can
lower the display resolution to read the window. You
will need the keyboard and mouse.
5 In the Sound Recording area, click the Volume
button, and then choose the source for sound
recording.
6 Click OK.
7 Close the window.
n
Audio distortion may occur if recording
volume is set too high.