HP 470 series User Manual
Page 61
–
Select
Visibility
, then press
OK
.
–
Select
Visible to all
, then press
OK
.
●
Bluetooth
Security level
may be set to
High
. Change this setting to
Low
as
follows:
–
Press
Menu
to display the printer menu.
–
Select
Bluetooth
, then press
OK
.
–
Select
Security level
, then press
OK
.
–
Select
Low
, then press
OK
.
●
The Passkey (PIN) that the device with Bluetooth wireless technology is
using for the printer may be incorrect. Make sure the correct Passkey for the
printer is entered in the device with Bluetooth wireless technology.
●
You may be too far from the printer. Move the device with Bluetooth wireless
technology closer to the printer. The maximum recommended distance
between the device with Bluetooth wireless technology and the printer is
10 meters (30 feet).
No page came out of the printer.
Solution
The printer may not recognize the type of file sent by the device with
Bluetooth wireless technology. For a list of the file formats that the printer
supports, see
.
Print quality is poor.
Solution
The photo you printed may be low resolution. For better results in the
future, set the digital camera to a higher resolution. Be aware that photos taken
with VGA-resolution cameras, such as those found in wireless phones, may not
have high enough resolution to produce a high-quality print.
The photo printed with borders.
Solution
The printing application installed on your device with Bluetooth
wireless technology may not support borderless printing. Contact the vendor of
the device, or go to their support website to obtain the latest updates for the
printing application.
My computer cannot set the device name using the Bluetooth wireless
connection.
Solution
Use a USB cable to connect your computer to the printer in order to
set the printer Bluetooth device name using the printer Toolbox. The printer
software must already be installed on the computer. See
and the onscreen Printer Help.
Chapter 6
56
HP Photosmart 470 series