HP 470 series User Manual
Page 59
●
If you cannot grasp the edge of the jammed paper to remove it, try the
following:
–
Turn off the printer.
–
If the optional HP Photosmart Internal Battery is not installed in the
printer, unplug the printer power cord. Wait about 10 seconds, then plug
the power cord back in.
–
If the optional HP Photosmart Internal Battery is installed in the printer,
unplug the printer power cord, if it is plugged in. Open the battery
compartment cover and remove the battery. Wait about 10 seconds,
then reinstall the battery. If desired, plug in the power cord.
–
Turn on the printer. The printer checks for paper in the paper path and
will automatically eject the jammed paper.
●
Press
OK
to continue.
Tip
If you experience paper jams while printing, try loading one sheet of
photo paper at a time. Insert the paper as far as it will go into the In tray.
A blank page came out of the printer.
Solution
●
Check the ink level from the printer menu. Press
Menu
, select
Tools
, press
OK
, then select
Cartridge status
. If the print cartridge is out of ink, replace
. Print a test page to check the print cartridge.
.
●
You may have begun printing and then cancelled the process. If you
cancelled the process before the photo started printing, the printer may have
already loaded paper in preparation for printing. The next time you print, the
printer will eject the blank page before starting the new printing project.
The photo did not print using the printer's default print settings.
Solution
You may have changed the print settings for the selected photo. Print
settings you apply to an individual photo override the printer's default print
settings. Discard all print settings that have been applied to an individual photo by
deselecting the photo. For more information, see
.
The printer ejects the paper when preparing to print.
Solution
Direct sunlight could be interfering with the operation of the automatic
paper sensor. Move the printer out of direct sunlight.
Chapter 6
54
HP Photosmart 470 series