HP 470 series - Manual (Page 27)

Memory card How to insert the memory card
xD-Picture Card ● Curved side of card points toward you
● Metal contacts face down
Removing a memory card
Wait until the Memory Card light stops flashing, then gently pull the memory card to
remove it from the printer.
Caution Do not pull out a memory card while the Memory Card light is
flashing. A flashing light means that the printer is accessing the memory card.
Removing a memory card while it is being accessed may damage the printer
and the memory card or corrupt the information on the memory card.
Saving photos from a memory card to the printer hard drive
When you insert a memory card, if there are new photos on the card that have not
previously been saved to the printer hard drive, the printer screen displays a message
asking you to transfer the photos to the internal hard drive. Press
OK .
If you have previously transferred a photo to the hard drive, but then deleted it from
the hard drive, you may want to transfer it again. Follow these steps:
1.
Insert a memory card and select photos to transfer. For information on viewing
and selecting photos, see
Deciding which photos to print .
2. Press Menu .
3. Select Transfer , then press OK .
4. Select Transfer to internal , then press OK .
5. Press OK again to confirm.
Checking the number of saved photos and the available space on the printer
hard drive
You can check the number of photos that are currently saved and the space
remaining on the printer hard drive.
1.
Press Menu .
2. Select Storage , then press OK .
3. Select Available space , then press OK .
Chapter 2
(continued)
22 HP Photosmart 470 series