Accessing instructions for using a wireless device – HP Notebook User Manual
Page 16
Startup
2. Press the wireless device button. (The wireless device
light turns on.)
3. To install the HP setup and configuration utility: Select
Start > All Programs > Software Setup > WLAN Utility
Installer, then select OK.
4. To install and configure your wireless device, follow the
installation and configuration instructions on the screen.
Accessing Instructions for Using a Wireless
Device
Instructions for installing and using an Integrated Wireless LAN
54g Network Adapter are included with the Integrated Wireless
LAN 54g Network Adapter SoftPaq available at the HP Web site
at
http://www.hp.com.
Instructions for any other integrated wireless device included
with your model are provided with your notebook. Depending on
the wireless device, the instructions may be provided in a Help
file within the device software or in documentation included
with your notebook.
Protecting the Notebook from
Power Surges
To protect the notebook from the power surges that may be
caused by an uncertain power supply or an electrical storm:
Plug the notebook power cord into an optional, high-quality
Provide surge protection on the cable that connects a modem
to surge protector. Surge protectors are available from most
computer or electronics retailers.
the an telephone line.
During electrical storm, run the notebook on battery power
or shut down the notebook and disconnect the power cord.
1-14
Startup and Reference Guide—Part 1