HP Notebook - Manual (Page 137)

Software Updates, Restorations and Utilities
Navigating and Selecting in the Setup Utility
Because the Setup utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by
keystroke.
To navigate, use the up and down arrow keys or tab .
To select an item, use the arrow keys to select the item, then
press
enter.
To close a display but remain in the Setup utility, press esc .
An on-screen guide to navigation and selection is displayed at
the lower edge of most Setup utility submenu screens. To
minimize keystrokes by using the Key Activates
Accelerators feature:
1. Press and hold alt. (A letter or number in most on-screen
items is highlighted.)
2. Press the keyboard key corresponding to the highlighted
letter or number in the item you want to select.
For example, to select an on-screen OK button, press alt. When
the “O” in OK is highlighted, press O.
Restoring Setup Utility Default Settings
To return all Setup utility settings to default values, select File
menu > Restore Defaults. (Identification information, including
ROM version information, is retained.)
Exiting the Setup Utility
The Setup Utility exit options are on the File menu. When you
select either option, Windows opens after the Setup utility
closes.
To close the utility and save your changes from ther current
session, select Save changes and exit.
To close the utility without saving changes from the current
session, select Ignore changes and exit.
Startup and Reference Guide––Part 2 9-13