HANNspree 1506-0B86000 - Manual (Page 34)

33
English
3.6 Adjusting PC Settings
1 Press INPUT and select PC as the signal
type.
2 Press MENU to enter the OSD Main
Menu screen.
3 Press to select the PC menu.
4 Press to enter the PC menu.
5 Press / to select an item.
6 Press / adjust the scales or options
settings.
7 Press MENU to return to the PC menu.
8 Press MENU to exit the OSD menu the OSD menu.
- The PC menu can be used to adjust the Auto Adjust, H Position, V Position, Phase
and Clock settings.
• You can apply the automatic adjustment by setting Auto Adjust at On.
• The scales for H Position and V Position range from -16 to 16.
• The scales for Phase and Clock range separately from 0 to 31, and from -50 to
50.
Pc Setup
Auto Adjust
H Position
V Position
Phase
Clock
Off
0
0
0
0
Select Return Menu Move