Harman-Kardon AVR 435 - Manual (Page 31)

SYSTEM CONFIGURATION 31 SYSTEM CONFIGURATION 31
SYSTEM CONFIGURATION SYSTEM CONFIGURATION
crossover frequency, Night mode and output level
settings will usually be the same and may be quickly
entered by entering the same data used for the
original input.
Once the settings outlined on the previous pages have
been made, the AVR 435 is ready for operation. While
there are some additional settings to be made, these
are best done after you have had an opportunity to lis-
ten to a variety of sources and different kinds of pro-
gram material. These advanced settings are described
on pages 39 and 40 of this manual. In addition, any
of the settings made in the initial configuration of the
unit may be changed at any time. As you add new or
different sources or speakers, or if you wish to change
a setting to better reflect your listening taste, simply
follow the instructions for changing the settings for that
parameter as shown in this section.
Having completed the setup and configuration process
for your AVR 435, you are about to experience the
finest in music and home theater listening. Enjoy!
AVR 435 (SW II) OM 11/18/05 9:20 AM Page 31