HP 4620 - Manual (Page 66)

5. Press the button to the right of OK, and then select Yes to continue.
6. Do one of the following:
• Scroll to and select the ring pattern assigned by your telephone company to fax
calls.
- Or -
• Select Auto Detect, and then follow the instructions on the printer’s control
panel.
NOTE: If the Ring Pattern Detection feature cannot detect the ring pattern or if
you cancel the feature before it finishes, the ring pattern is automatically set to
the default, which is All Rings.
NOTE: If you are using either a PBX phone system that has different ring
patterns for internal and external calls, you must call the fax number from an
external number.
Set the dial type
Use this procedure to set tone-dialing or pulse-dialing mode. The factory-set default is
Tone. Do not change the setting unless you know that your phone line cannot use tone
dialing.
NOTE: The pulse-dialing option is not available in all countries/regions.
To set the dial type
1. From the Home screen, press the (Setup) button.
2. Using the buttons on the right, scroll to and select Fax Setup, select Basic Setup,
and then select Dial Type.
3. Scroll to and select Tone Dialing or Pulse Dialing.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not
answer or was busy, the printer attempts to redial based on the settings for the busy-
redial and no-answer-redial options. Use the following procedure to turn the options on
or off.
To set the redial options
1. From the Home screen, press the (Setup) button.
2. Using the buttons on the right, scroll to and select Fax Setup, select Advanced
Setup, and then select Busy Redial or No Answer Redial.
•
Busy redial: If this option is turned on, the printer redials automatically if it
receives a busy signal. The factory-set default for this option is On.
• No answer redial: If this option is turned on, the printer redials automatically if
the receiving fax machine does not answer. The factory-set default for this
option is Off.
3. Scroll to and select the appropriate options, and then press the button to the right
of OK.
Chapter 5
62 Fax