beautypg.com

Troubleshoot installation issues, Hardware installation suggestions – HP 4620 User Manual

Page 124

background image

Check the printer IP address

To check the IP address of the printer, obtain the IP address by printing a network
configuration page. Press the (Wireless) button, and then, using the buttons on
the right, scroll to and select Print Reports, and then select Network
Configuration Page
.

Ping the printer using the IP address from the command prompt (Windows) or from
Network Utility (Mac OS X). (Network Utility is located in the Utilities folder in the
Applications folder at the top level of the hard disk.)
For example, if the IP address is 123.123.123.123, type the following at the
command prompt (Windows):
C:\Ping 123.123.123.123
Or
In Network Utility (Mac OS X), click the Ping tab, type the 123.123.123.123 in the
box, and then click Ping.
If a reply appears, the IP address is correct. If a time-out response appears, the IP
address is incorrect.

TIP: If you are using a computer running Windows, you can visit the HP online
support website at www.hp.com/go/customercare. This website provides
information and utilities that can help you correct many common printer problems.

Troubleshoot installation issues

If the following topics do not help, see HP support for information about HP support.

TIP: You can visit the HP online support website at www.hp.com/go/customercare
for information and utilities that can help you correct many common printer
problems.

Hardware installation suggestions

HP software installation suggestions

Solve network problems (HP Officejet 4620 e-All-in-One series)

Hardware installation suggestions

Check the printer

Make sure that all packing tape and material have been removed from outside and
inside the printer.

Make sure that the printer is loaded with paper.

Make sure that no lights are on or blinking except the Ready light, which should be
on. If the Attention light is blinking, check for messages on the printer control panel.

Check the hardware connections

Make sure that any cords and cables that you are using are in good working order.

Make sure that the power cord is connected securely to both the printer and to
a working power outlet.

Chapter 8

120

Solve a problem

This manual is related to the following products: