HP e1200-160 - Manual (Page 68)

Visual Manager User Interface
68 Network Storage Router e1200-160
Viewing and Changing Fibre Channel Host Information
To view or change current host information:
1. In the Mapping Menu screen, select the desired Fibre Channel port.
2. Click Edit/View in the Host section of the screen.
The Fibre Channel Host Name dialog box is displayed. Current host
information is shown at the top of the dialog box.
3. Enter the new settings and then select Modify.
Fibre Channel Host Name settings:
■ Host Name
■ Host ID (hexadecimal)
■ Port WWN Hi (hexadecimal) (service mode-restricted access)
■ Port WWN Lo (hexadecimal) (service mode-restricted access)
■ Node WWN Hi (hexadecimal) (service mode-restricted access)
■ Node WWN Lo (hexadecimal) (service mode-restricted access)
■ Map Name