HP e1200-160 - Manual (Page 120)

Serial/Telnet User Interface
120 Network Storage Router e1200-160
Each of the options is discussed in the following paragraphs.
Scrolling between the Display Pages of the Host List Edit Screen
To scroll up and down the host entries, select P or N.
Selecting a Host
To select a host from the list, enter the number displayed in the “N#” or the
“Num” column at the left of the screen.
Adding a Host to the Host List
To add a host to the Host List, select Add (A).
If the host is an FCP host, the Host Name, Host ID, port WWN, and Node WWN
for FCP host must be entered. (WWN values are hexidecimal.)