HP e1200-160 - Manual (Page 149)

FTP User Interface
149 Network Storage Router e1200-160
Copy Trace Buffers
Use the following procedure to save copies of the trace buffers:
1. Connect the router to the Ethernet network used by the host computer.
2. Start an FTP session using the router IP address:
ftp
where IP address is the address of the router.
The default router IP address is 1.1.1.1 .
Note: You will need to specify the directory location where your FTP utility will store
the trace file.
3. Enter the user name and password.
The default user name is root and the default password is password .
HP recommends that the user name and password be changed from the default
values.
4. Specify binary mode:
bin
5. Specify the filename (with the extension .txt) using the get command.
For the current trace buffer, use the following command:
get curtrace.txt
For the previous trace buffer, use the following command:
get prvtrace.txt