HP e1200-160 - Manual (Page 20)

Introduction
20 Network Storage Router e1200-160
Functional Overview
The router translates the Fibre Channel Protocol (FCP) to and from the SCSI
Protocol. It transfers commands, data, and status information to and from Fibre
Channel controllers and SCSI devices.
Supported devices include:
■ Initiator Devices – Fibre Channel and SCSI hosts
■ Direct Access Devices – RAID Controllers, disk drives, JBODs
■ Sequential Access Devices – Tape drives
■ Changer Devices – Tape and Magneto-Optical Libraries
The router provides multiple Fibre Channel to SCSI I/O configurations.
A sample configuration is illustrated in Figure 2 .
Figure 2: Example configuration