HP e1200-160 - Manual (Page 116)

Serial/Telnet User Interface
116 Network Storage Router e1200-160
Figure 52 is an example of the screen display when creating an entry for a Fibre
Channel map.
Figure 52: Creating a map entry for a Fibre Channel map
Note: If the device being added is a SCSI device, the Target ID and LUN ID must be
entered. The Target ID must already be defined in the SCSI configuration.
Creating an Entry for a SCSI Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note: All essential information about the device must be known.
A series of questions is displayed. The questions will vary based on the “Current”
map protocol. Required information includes the Target ID and LUN address,
protocol, port, device name, and device type must be entered.
Figure 53 is an example of the screen display when creating an entry for a SCSI
map.