HP e1200-160 User Manual

Page 48

Text mode
Original mode

Visual Manager User Interface

Port Configuration - Ethernet Settings (Service Mode - Restricted Access)

To change the Ethernet configuration settings, select the Ethernet port icon. The
Ethernet Configuration dialog box is displayed.

See

Figure 14

for an example of the Ethernet Configuration dialog box.

Figure 14: Ethernet Configuration dialog box

Ethernet configuration settings:

■

Ethernet Mode can be set to one of the following options:

— 10Mps Only

— 100Mps (half duplex) Only

— 100Mps (full duplex) Only

— 10/100Mps (Auto-Neg.)

■

MAC address is the Ethernet physical address of the router.

Caution:

If this configuration is incorrectly set, processing difficulties may occur.

Before changing this setting, evaluate the need for the change and verify the
desired setting. HP recommends backing up the router configuration to an
external file before making changes to this setting.