Ae metering – HP R507 User Manual
Page 60
60
HP Photosmart R507/R607 User’s Manual
1
In the
Capture
Menu
(page 50),
select
ISO Speed
.
2
In the
ISO Speed
sub-menu, use
the
buttons to highlight a
setting.
3
Press
Menu/OK
to save the
setting and return to the
Capture
Menu
.
If the setting is anything other than the default
Auto
setting, the
number value for the setting will appear in the
Live View
screen.
The new setting remains in effect until it is changed again or
until the camera is turned off. The
ISO Speed
setting resets to
the default
Auto
setting when you turn the camera off. Holding
down the
Menu/OK
button when you turn the camera back on
will restore this setting to what it was when you turned it off.
AE Metering
NOTE
This setting does not apply when recording video clips.
This setting allows you to specify which region of a scene the
camera will use to calculate the exposure.
1
In the
Capture Menu
select
AE Metering.
2 In the AE Metering
sub-menu
,
use
the
buttons to highlight a
setting. The new setting is applied
to the
Live View
screen behind the
menu, so you can see the effect
each setting will have on the picture.
3
Press
Menu/OK
to save the setting and return to the
Capture
Menu
.