HP R507 - Manual (Page 125)

Chapter 7: Troubleshooting and Support 125
My image is
blurry.
The light is low
and the flash
is set to
Flash Off .
In dim light, the camera requires
a longer exposure. Use a tripod
to hold the camera steady,
improve lighting conditions, or set
the flash to Flash On (see
Setting the Flash on page 41).
The camera
was set to the
wrong focus
setting for the
scene.
Set the camera to Macro ,
Normal , or Super Macro focus
and try taking the picture again
(see Using the Focus Range
Settings on page 38).
You moved the
camera while
you took the
picture.
Hold the camera steady as you
press the Shutter button or use
a tripod. Watch for the icon in
the Image Display (this means
that it is almost impossible to hold
steady, and you must use a
tripod).
The camera
focused on the
wrong thing, or
was unable to
focus.
z
Make sure the focus brackets
turn green before taking the
picture (see
Focusing the
Camera on page 36).
z Use Focus Lock (see page 38).
z Use focus search priority (see
page 39).
Problem Possible cause Solution