Recording audio with still pictures – HP R507 User Manual
Page 32

32
HP Photosmart R507/R607 User’s Manual
You can use
Playback
to review the pictures you have taken
(see
NOTE
If you release the
Shutter
button only halfway after
taking a picture, the focus, exposure, and white balance
measurements from the previous picture are retained. You
can then press the
Shutter
button all the way down again
and take another picture with the same focus, exposure,
and white balance as the previous picture. You can
continue to do this to capture a sequence of pictures using
the same focus, exposure, and white balance. This is
helpful when rapidly taking pictures.
Recording Audio with Still Pictures
There are two ways to attach an audio clip to a still picture:
•
Add an audio clip to the picture later, or re-record the
audio that was captured when the picture was taken. For
details on how to do this, see
•
Record the audio while you are taking the picture, as
explained in this section. You will not be able to use this
method if the camera is in
Panorama
mode, or when
using the
Self-Timer
or
Burst
settings.
An audio clip can be up to 60 seconds long.
1
Press the
Shutter
button all the way down to take the picture.
2
Continue to hold the
Shutter
button down to record the
audio clip. A microphone icon ( ) and audio counter
appear on the Image Display during recording.
3
To stop recording audio, release the
Shutter
button.