HONDA Outdoor Motor BF90D - Manual (Page 62)

60
Top-Mount Type
OPERATION
EMERGENCY STOP
SWITCH
LANYARD EMERGENCY STOP
SWITCH CLIP
TAKING CARE OF
UNEXPECTED PROBLEMS
If the engine is not properly
warmed up bef ore raising the
engine speed, the buzzer and
overheat indicator may activate
and the engine speed will be
automatically reduced.
The cooling system may f reeze in
areas where the temperature
reaches 32°F (0°C) or below.
Cruising at high speed without
warming the engine up may cause
engine damage.
During the warm-up period, check
the oil pressure indicator (p.
),
overheat indicator (p. ), and
cooling system indicator (p. ).
If the indicators show any
abnormal condition, immediately
stop the engine and determine the
cause of the problem. Refer to
on
p. .
If the fast idle button was used to
warm up the engine, gradually
return the control lever to the N
(neutral) position as the engine
warms up.
Put the emergency stop switch clip
in the emergency stop switch, and
attach the emergency stop switch
lanyard securely to the operator or
to the operator’s PFD (Personal
Flotation Device). 1.
39
40
41
119 122
6.
08/08/04 18:47:42 31ZY9600_061