Hitachi CP-X10000 - Manual (Page 8)

8
Setting up
Setting up
Read this chapter through fi rst. Then install the projector into place.
►Do not place the product on an unstable surface such as an
uneven, tilted, or vibrating place.
►Do not place the product near water - for example, near a bathtub, washbowl,
kitchen sink, or laundry tub; in a wet basement, near a swimming pool, beach; or
outdoors.
WARNING
►Do not place the product in a dusty, smoky, or humid place -
for example, on a passage, in a smoking space, in a kitchen, or outdoors.
►Do not place the product near heat sources - for example, radiators, heat
registers, stoves, or other product (including amplifi ers) that produces heat.
►Do not place this product in a magnetic fi eld.
CAUTION
Installation environment
This product requires an installing place that is stable, cool and airy. Check your
installation environment in accordance with the following.
►Do not place the product in a place where radio interference may
be caused.
► Do not place the projector in a place where any strong lights hit the remote
sensors.
NOTICE
Projection style
This projector can be used by the following projection styles. Choose the style
suitable to your use.
(1) Standard style
(placed on a table)
(2) Ceiling mount
(suspended from a ceiling)
• In the case of ceiling mount, upward projection, or downward
projection, the specifi ed mounting accessories (  77 ) and service are required
to install the projector. Request them from your dealer. Ask your dealer for
installation other than styles above.
NOTE
►Consult with your dealer about installation beforehand.
►Use only the mounting accessories the manufacturer specifi ed, and leave
installing and removing the projector with the mounting accessories to the
service personnel.
WARNING