Hitachi CP-X10000 - Manual (Page 49)

49
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON
-( 1 to 4) on the remote control (7).
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY BUTTON - (1
to 4) and press the ► button to display the MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following functions to the
chosen button.
• COMPUTER IN1: Sets port to COMPUTER IN1.
• COMPUTER IN2: Sets port to COMPUTER IN2.
• BNC: Sets port to BNC.
• HDMI: Sets port to HDMI.
• DVI-D: Sets port to DVI-D.
• COMPONENT: Sets port to Component (Y, Cb/Pb, Cr/Pr).
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO 1: Sets port to VIDEO 1.
• VIDEO 2: Sets port to VIDEO 2.
• INFORMATION: Displays the INPUT -INFORMATION- ( 55) or
the NETWORK -INFORMATION- ( 55) or nothing.
• AUTO KEYSTONE : Performs automatic keystone distortion
correction ( 47).
• MY MEMORY: Loads one of adjustment data stored ( 33).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pushed.
When no data is saved in memory, the dialog "No
saved data" appears.
When the current adjustment is not saved to
memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE ( 29).
• FILTER RESET: Displays the filter time reset confirmation dialogue ( 48).
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item ( 46) appear or disappear.
• P by P SWAP: Swaps the picture of right side with left side in the P by P
mode.( 27)
• LENS MEMORY-1: Loads the LENSMEMORY-1
• LENS MEMORY-2: Loads the LENSMEMORY-2
• LENS MEMORY-3: Loads the LENSMEMORY-3
It shifts the lens position in accordance with the memory saved for
the type of the present lens unit.
When there is no memory for the lens type, this function is ignored.
• MY IMAGE: Displays the MY IMAGE menu ( 59).
MY SOURCE
This item is to assign an input signals to MY
SOURCE button on the remote control ( 22).
Using the ▲/▼ buttons sets one of the input
signal.
(continued on next page)