Hitachi CP-X10000 - Manual (Page 37)

37
INPUT menu
Item Description
COMPONENT
Using the ▲/▼ buttons switches the function of the Component (Y,
Cb/Pb, Cr/Pr) port.
COMPONENT ó SCART RGB
When the SCART RGB is selected, the Component (Y, Cb/Pb,
Cr/Pr) and VIDEO 1 ports will function as a SCART RGB port. A
SCART adapter or SCART cable is required for a SCART RGB
input to the projector. For details, contact your dealer.
VIDEO FORMAT
Set the video format for the S-VIDEO, VIDEO 1 port and VIDEO 2
port.
(1) Use the ▲/▼ buttons to
select the input port.
(2) Using the ◄/► buttons
switches the mode for video
format.
AUTO ó NTSC ó PAL ó SECAM
N-PAL ó M-PAL ó NTSC4.43
• This item is performed only for a video
signal from the VIDEO 1, VIDEO 2 port or the
S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
DIGITAL FORMAT
Set the video format for the HDMI port and DVI-D port.
(1) Use the ▲/▼ buttons to select the input port.
(2) Using the ◄/► buttons switches the
format of digital format.
AUTO ó VIDEO ó COMPUTER
Feature
AUTO Selecting the optimum mode automatically.
VIDEO Suitable for DVD signals
COMPUTER Suitable for computer signals
• If the COMPUTER is selected, COLOR, TINT, OVERSCAN can
not be selected.
I O
HDMI DVI-D
CONTROL IN CONTROL OUT REMOTE
CONTROL
IN
OUT
S-VIDEO
COMPUTER IN2 COMPUTER IN1
VIDEO 1 BNC
R/Cr/Pr G/Y B/Cb/Pb H V VIDEO 2
Y
Cb/Pb
Cr/Pr
AC IN
LAN
MONITOR
OUT
SCART OUT
Video
G
B
R
(continued on next page)