Hitachi CP-X10000 - Manual (Page 39)

39
INPUT menu
Item Description
RESOLUTION
The resolution for the COMPUTER IN1, COMPUTER IN2 and BNC
input signals can be set on this projector.
In the RESOLUTION menu select the resolution you
wish to display using the ▲/▼ buttons.
■AUTO
Selecting AUTO will set a resolution
appropriate to the input signal.
■STANDARD
Pressing the ► or ENTER button when
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and horizontal
size.
The INPUT-INFORMATION- dialog (
55)
will be displayed.
■CUSTOM
(1) To set a custom resolution use the
▲/▼ buttons to select the CUSTOM and
the CUSTOM RESOLUTION BOX will be
displayed. Set the horizontal (HORZ) and
vertical (VERT) resolutions using the
▲/▼/◄/► buttons.
This function is may not support all
resolutions.
(2) To save the setting place the cursor on the
right-most digit and press the ► button.
The horizontal and vertical positions, clock
phase and horizontal size will be automatically
adjusted.
After the INPUT-INFORMATION- dialog
(
55) has displayed for about 3 seconds the
screen will return to the RESOLUTION menu
displaying the changed resolution.
To revert back to the previous resolution
without saving changes place the cursor on
the left-most digit and press the ◄ button.
The screen will then return to the RESOLUTION menu displaying the
previous resolution.
• For some pictures, this function may not work well.