Hitachi CP-X10000 - Manual (Page 33)

33
PICTURE menu
Item Description
ACTIVE IRIS
Using the ▲/▼ cursor buttons changes the active iris control mode.
PRESENTATION ó THEATER ó MANUAL
Feature
PRESENTATION
The active iris displays the best presentation
image for both bright and dark scenes.
THEATER
The active iris displays the best theater image for
both bright and dark scenes.
MANUAL
The active iris is set to fixed brightness (0:dark -
7:bright)
• The screen may flicker when the PRESENTATION or THEATER
modes are selected. If this occurs select MANUAL.
MY MEMORY
This projector has 4 memories for adjustment data (for all the items
of the PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or
ENTER button performs each function.
SAVE-1 ó SAVE-2 ó SAVE-3 ó SAVE-4
LOAD-4 óLOAD-3 ó LOAD-2 ó LOAD-1
• This item can be selected not only for a video, s-video and
component signal but also HDMI and DVI-D signal when the VIDEO
is selected on the DIGITAL FORMAT item.
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data being stored of a memory will be
lost by saving new data into the memory.
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition will be lost by
loading data. If you want to keep the current adjustment, please
save it before performing a LOAD function.
• There may be some noise and the screen may flicker for a
moment when loading data. This is not malfunction.
• The LOAD functions can be also performed by the MY MEMORY
button which can be set by the MY BUTTON item in OPTION menu
( 49).