HP iPAQ hx2000 - Manual (Page 110)

Using Wi-Fi (not available on all models)
User’s Guide 8–14
10. Enter the user name, password, and domain name provided
by your network administrator.
Note: If a domain name was not provided, you may be able to
connect without entering one.
11. To change advanced settings, tap the Advanced button.
Note: You will not need to change advanced settings unless:
■ The server to which you are connecting does not use
dynamically-assigned IP addresses and you need to enter
your TCP/IP settings,
or
■ You need to change server DNS or WINS settings.
12. Tap the Finish button to save the changes.
Starting VPN Server Connections
To start a connection through a VPN server, be sure Wi-Fi is
powered on and connected, then select the VPN network.
Setting Up Proxy Server Settings
If you are connected to your ISP or private network during
synchronization, your HP iPAQ should download proper proxy
settings from your computer. If these settings are not on your
computer or need to be changed, you will need to set them up
manually. To set up proxy server settings:
1. Contact your ISP or network administrator for the proxy
server name, server type, port, type of Socks protocol used,
and your user name and password.
2. Be sure Wi-Fi is powered on.
3. Tap the Connections icon ( or ) > Settings > Task tab.