HP DL580 - Manual (Page 49)

Hardware options installation 49
14. Replace the center bracket.
15. Install hard drives or hard drive blanks into each bay.
16. Replace the access panel (" Removing the access panel " on page 23 ).
17. Slide the server into the rack.
Tape drive
l
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1. Power down the server (on page 21 ).
2. Extend the server from the rack (" Extending the server from the rack " on page 21 ).
3. Remove the access panel (" Removing the access panel " on page 23 ).
4. Remove the bracket.