Installing the drive cage – HP DL580 User Manual
Page 45
Hardware options installation 45
2.
Prepare the SAS hard drive.
3.
Install the hard drive into the server.
4.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("
Installing the drive cage
l
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1.
Power down the server (on page
).
2.
Extend the server from the rack ("
Extending the server from the rack
).
3.
Remove the access panel ("
).
This manual is related to the following products: