Honeywell NOTIFIER IFS-2600 - Manual (Page 21)

IFS-2600 Installation & Programming Manual Page 17
P/N 10069 ECN08-0066
PLACING INTO OPERATION
Suitably qualified technicians must install the panel. The following check procedures are recommended after
every installation and prior to initial power-up.
A thorough visual inspection should be made to every aspect of the fire panel. This includes loose wire, metal
filings, loose circuit boards, loose cabling, damage in transit etc.
All problems must be rectified immediately as they could cause incorrect operation or permanent damage to
the equipment.
EQUIPMENT AS FITTED
QTY Description Code
1 MAIN CONTROL BOARD IFS -2004
1 MAIN TERMINATION BOARD IFS -2005
1 MAIN POWER SUPPLY IFS -2006
8 ZONE EXPANSION BOARD IFS -804
16 ZONE INDICATOR BOARD IFS -816
ADD ON, 8 WAY RELAY BOARD IFS-717
EXTERNAL POWER SUPPLY BOOSTER PS244, PS249, NPS-3,
NPS-5, NPS-11
3A DOOR HOLDER P/SUPPLY TRANSFORMER 2600/DHTX
INITIAL CHECKLIST

System general appearance good

Cabinet colour and condition good

Cabinet keyed 003

All circuit boards firmly fastened

Manual call point fitted & functional

Viewing window clear and firmly secured

Cable entries adequately sealed

240VAC mains cabling is correctly terminated

All earthing secured

Transformer securely mounted

Transformer correctly wired

All ribbon cables firmly secured

All operational zones adequately identified

All fuses correct value and fitted properly

All other modules securely fitted

Manufacturing label affixed
You are now ready to power up the IFS-2600 Fire Indicator Panel.