HP vs80 - Manual (Page 49)

Chapter 3 Autoloader Administration 49
Retrieving Information About the Autoloader
The Information menu provides access to information about the autoloader,
including the cycle count, error log, and firmware revision.
Cycle Count
This option displays the total system cycle count, incrementing each time a tape
is loaded into the drive or exported from the autoloader.
To use this option, follow these steps:
1. From the Home Screen or main menu, press the [+] or [-] button until
Information appears on the top line of the LCD screen.
2. Press the [Enter] button to access the available options.
3. Press the [+] or [-] button until Cycle Count appears on the LCD screen.
The LCD screen displays the total cycle count.
4. Press the [Cancel] button when done.
View Event Log
This option provides access to the most recent autoloader errors and events
(see Table 5 on page 66 for a description of error codes).
To use this option, follow these steps:
1. From the Home Screen, press the [+] or [-] button until Information
appears on the top line of the LCD screen.
2. Press the [Enter] button to access the available options.
3. Press the [+] or [-] button until View Event Log appears on the LCD screen.
The LCD screen also displays the total number of errors and events
currently stored in the event log.
4. Press the [Enter] button to access the most recently logged event.
5. Press
the [+] or [-] button to display each event in the log.
6. Press [Cancel] when done.